Neverending Story = Neverending Errors

Please post here for issues related to Blu-ray discs
Post Reply
stealthdave
Posts: 2
Joined: Fri Jun 10, 2016 2:57 am

Neverending Story = Neverending Errors

Post by stealthdave »

Sorry, I couldn't help the pun. :) I finally found a Blu-Ray disc that Makemkv couldn't handle: The Neverending Story. Here's the log dump:

http://pastebin.com/4F2pZXps

Sometimes I can get to the checkbox menu to choose a stream, but it always fails. Any assistance would be greatly appreciated!

- Dave
Woodstock
Posts: 9965
Joined: Sun Jul 24, 2011 11:21 pm

Re: Neverending Story = Neverending Errors

Post by Woodstock »

Code: Select all

DEBUG: Code 0 at XV|gXdbpWpXuJun0:29398737
DEBUG: Code 100795393 at N;87||f5zz=H&u>Wt_:29396092
DEBUG: Code 100795393 at N;87||f5zz=H&u>Wt_:29393930
Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading '/BDMV/CLIPINF/00033.clpi' at offset '0'
Your drive is having issues with the disk, so MakeMKV isn't even getting a chance to look at it properly.

Check the disk for fingerprints, scratches and cracks. The error messages can also mean a hardware failure, but I've not seen that particular error before.
MakeMKV Frequently Asked Questions
How to aid in finding the answer to your problem: Activating Debug Logging
stealthdave
Posts: 2
Joined: Fri Jun 10, 2016 2:57 am

Re: Neverending Story = Neverending Errors

Post by stealthdave »

Woodstock wrote:

Code: Select all

DEBUG: Code 0 at XV|gXdbpWpXuJun0:29398737
DEBUG: Code 100795393 at N;87||f5zz=H&u>Wt_:29396092
DEBUG: Code 100795393 at N;87||f5zz=H&u>Wt_:29393930
Error 'Scsi error - NOT READY:LOGICAL UNIT IS IN PROCESS OF BECOMING READY' occurred while reading '/BDMV/CLIPINF/00033.clpi' at offset '0'
Your drive is having issues with the disk, so MakeMKV isn't even getting a chance to look at it properly.

Check the disk for fingerprints, scratches and cracks. The error messages can also mean a hardware failure, but I've not seen that particular error before.
Sorry for the delayed response, but yes, that was the issue! I couldn't see anything specifically, but after I wiped the disc and retried it a few times (maybe some dust got into drive itself?) it worked as expected!

Thanks!
Post Reply