www.makemkv.com

MakeMKV support forum
It is currently Mon May 21, 2018 3:00 pm

All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sun Mar 25, 2018 3:20 pm 
Offline

Joined: Fri Mar 23, 2018 10:34 pm
Posts: 6
Hello all, as I said in my title Kung Fu Panda 2 Blu Ray (don't judge I think its funny) is not even being recognized as a disc by my Blu Ray drives in my PC. Normally I wouldn't post, and would do some more searching in the forums, but the following items of information have got a me a bit more befuddled than usual:

1) I have tried the disc in three different functioning Blu Ray drives in my PC. They have all ripped multiple other Blu Rays before and after the problem disc.
2) The disc plays back in my blu ray player for my TV.
3) I have cleaned the disc with a soft cloth and non-abrasive cleaner and tried to get the drives to recognize the disc again afterwards.

I have ripped half my collection and have not run into any problems, so I am curious as to what this could be. Any help is appreciated, and I would go out and just repurchase the disc but I am worried I would just have the same problem (if that is not something to worry about please let me know).


Top
 Profile  
Reply with quote  
PostPosted: Sun Mar 25, 2018 3:40 pm 
Offline

Joined: Sun Jul 24, 2011 11:21 pm
Posts: 5085
When you put the disk in the drive without MakeMKV running, does the operating system recognize it and allow you to browse it?

If the OS won't allow that much, it won't even tell MakeMKV the disk is there, so let's start with that basic.

_________________
How to aid in finding the answer to your problem: http://www.makemkv.com/faq/item/8


Top
 Profile  
Reply with quote  
PostPosted: Sun Mar 25, 2018 4:43 pm 
Offline

Joined: Fri Mar 23, 2018 10:34 pm
Posts: 6
Correct. No makemkv running, I insert the disc, nothing happens, I right click the corresponding drive and attempt to explore and the following message is displayed "please insert disc" and the drive ejects.


Top
 Profile  
Reply with quote  
PostPosted: Sun Mar 25, 2018 5:05 pm 
Offline

Joined: Fri Mar 23, 2018 10:34 pm
Posts: 6
Well I shouldn't say nothing happens, the standard whirring and noise happens like the drives are trying to read the disc. But then it stops and no results are found.


Top
 Profile  
Reply with quote  
PostPosted: Sun Mar 25, 2018 8:56 pm 
Offline

Joined: Sun Jul 24, 2011 11:21 pm
Posts: 5085
Well, I just made a search of Amazon to make sure there wasn't a UHD version you accidentally got hold of... :)

Trying it in multiple drives points strongly at the disk itself. Assuming you've gone through the "clean with a soft, damp cloth" routine, and it is still not recognized, have you reset your computer recently? It is quite possible that Windows itself is corrupted at the drive interface level, and resetting will clear it up.

Note that there is a difference between "reset" and "reboot". Reset means either powering down or hitting the hardware reset button (if present) after shutting down Windows, so that everything on the motherboard completely restarts. Reboots do not properly reset all the hardware.

_________________
How to aid in finding the answer to your problem: http://www.makemkv.com/faq/item/8


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: Bing [Bot] and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group