How to get the core audio track information with makemkvcon?

Discussion of advanced MakeMKV functionality, expert mode, conversion profiles
Post Reply
mgutt
Posts: 72
Joined: Sun May 05, 2019 6:38 pm

How to get the core audio track information with makemkvcon?

Post by mgutt » Sun Jul 28, 2019 11:18 am

I used info -r and it returns the following:

Code: Select all

...
SINFO:1,0,31,6121,"<b>Track information</b><br>"
SINFO:1,0,33,0,"0"
SINFO:1,0,38,0,""
SINFO:1,0,42,5088,"( Lossless conversion )"
SINFO:1,1,1,6202,"Audio"
SINFO:1,1,2,0,"Surround 5.1"
SINFO:1,1,3,0,"eng"
SINFO:1,1,4,0,"English"
SINFO:1,1,5,0,"A_TRUEHD"
SINFO:1,1,6,0,"TrueHD"
SINFO:1,1,7,0,"TrueHD"
SINFO:1,1,13,0,"128 Kb/s"
SINFO:1,1,14,0,"6"
SINFO:1,1,17,0,"48000"
SINFO:1,1,18,0,"24"
SINFO:1,1,22,0,"1024"
SINFO:1,1,28,0,"eng"
SINFO:1,1,29,0,"English"
SINFO:1,1,30,0,"TrueHD Surround 5.1 English"


SINFO:1,1,31,6121,"<b>Track information</b><br>"
SINFO:1,1,33,0,"90"
SINFO:1,1,38,0,"d"
SINFO:1,1,39,0,"Default"
SINFO:1,1,40,0,"5.1(side)"
SINFO:1,1,42,5088,"( Lossless conversion )"
SINFO:1,2,1,6202,"Audio"
SINFO:1,2,2,0,"Surround 5.1"
SINFO:1,2,3,0,"eng"
SINFO:1,2,4,0,"English"
SINFO:1,2,5,0,"A_AC3"
SINFO:1,2,6,0,"DD"
SINFO:1,2,7,0,"Dolby Digital"
SINFO:1,2,13,0,"640 Kb/s"
SINFO:1,2,14,0,"6"
SINFO:1,2,17,0,"48000"
SINFO:1,2,22,0,"2304"
SINFO:1,2,28,0,"eng"
SINFO:1,2,29,0,"English"
SINFO:1,2,30,0,"DD Surround 5.1 English"


SINFO:1,2,31,6121,"<b>Track information</b><br>"
SINFO:1,2,33,0,"90"
SINFO:1,2,38,0,""
SINFO:1,2,40,0,"5.1(side)"
SINFO:1,2,42,5088,"( Lossless conversion )"
SINFO:1,3,1,6202,"Audio"
SINFO:1,3,2,0,"Surround 5.1"
SINFO:1,3,3,0,"jpn"
SINFO:1,3,4,0,"Japanese"
SINFO:1,3,5,0,"A_AC3"
SINFO:1,3,6,0,"DD"
SINFO:1,3,7,0,"Dolby Digital"
SINFO:1,3,13,0,"640 Kb/s"
SINFO:1,3,14,0,"6"
SINFO:1,3,17,0,"48000"
SINFO:1,3,22,0,"0"
SINFO:1,3,28,0,"eng"
SINFO:1,3,29,0,"English"
SINFO:1,3,30,0,"DD Surround 5.1 Japanese"
...
I compared the data with the GUI and the first audio track is the TrueHD 5.1, the second is the core and the third is a separate DD5.1 track. How do I verify that without GUI?

Compared with the Japanese track this are the differences:

Code: Select all

SINFO:1,1,38,0,"d"
SINFO:1,1,39,0,"Default"
...
SINFO:1,2,22,0,"2304"

Post Reply