Asus BW-16D1HT Firmware

Forum for discussions about UHD-capable dives
KBJghost
Posts: 16
Joined: Sun Feb 01, 2015 1:46 am

Re: Asus BW-16D1HT Firmware

Post by KBJghost » Sat Jan 06, 2018 7:06 pm

Woodstock wrote:It's not quite "riplock" - LG has "quiet mode" that slows the drive down to keep it from getting noisy. There is a utility that turns that off.
Utility name? Maybe a link?

Thanks

SamuriHL
Posts: 399
Joined: Mon Jun 14, 2010 5:32 pm

Re: Asus BW-16D1HT Firmware

Post by SamuriHL » Sat Jan 06, 2018 7:23 pm

barrett70 wrote:@TeddyRaspin
I managed to flash in 1.02 but now he does not want to play any discs anymore.
a solution?
Thanks.
You're going to need the calibration data. I ordinarily wouldn't link to a competing site's forum, but, in this case you desperately need this patch:

https://forum.redfox.bz/threads/anydvd- ... ost-479726

barrett70
Posts: 24
Joined: Sun Dec 31, 2017 9:02 pm

Re: Asus BW-16D1HT Firmware

Post by barrett70 » Sat Jan 06, 2018 7:43 pm

@TeddyRaspin
it works ! thanks. :D
I thank you for taking me out of this bad situation.

SamuriHL
Posts: 399
Joined: Mon Jun 14, 2010 5:32 pm

Re: Asus BW-16D1HT Firmware

Post by SamuriHL » Sat Jan 06, 2018 7:56 pm

barrett70 wrote:@TeddyRaspin
it works ! thanks. :D
I thank you for taking me out of this bad situation.
And what have we learned? Stop flashing while you're ahead. LOL :D

ron spencer
Posts: 10
Joined: Sun Feb 21, 2010 7:28 pm

Re: Asus BW-16D1HT Firmware

Post by ron spencer » Sun Jan 07, 2018 1:24 am

I have just bought this drive...it is a January 2017 manufactuer date with firmware 3.0. If 3.01 is a faster rip and has no issues otherwise, where can I get 3.01 and how to flash? Or should I just leave well enough alone?

thx!

SamuriHL
Posts: 399
Joined: Mon Jun 14, 2010 5:32 pm

Re: Asus BW-16D1HT Firmware

Post by SamuriHL » Sun Jan 07, 2018 2:50 am

ron spencer wrote:I have just bought this drive...it is a January 2017 manufactuer date with firmware 3.0. If 3.01 is a faster rip and has no issues otherwise, where can I get 3.01 and how to flash? Or should I just leave well enough alone?

thx!
https://www.makemkv.com/forum2/viewtopi ... 110#p59110

ron spencer
Posts: 10
Joined: Sun Feb 21, 2010 7:28 pm

Re: Asus BW-16D1HT Firmware

Post by ron spencer » Sun Jan 07, 2018 5:44 pm

SamuriHL wrote:
ron spencer wrote:I have just bought this drive...it is a January 2017 manufactuer date with firmware 3.0. If 3.01 is a faster rip and has no issues otherwise, where can I get 3.01 and how to flash? Or should I just leave well enough alone?

thx!
https://www.makemkv.com/forum2/viewtopi ... 110#p59110
Sorry to ask...is this official firmware? I looked as Asus site and couldn't find. Sorry for newb question.

starmax
Posts: 38
Joined: Mon Jul 17, 2017 4:19 pm

Re: Asus BW-16D1HT Firmware

Post by starmax » Sun Jan 07, 2018 5:55 pm

ron spencer wrote:Sorry to ask...is this official firmware? I looked as Asus site and couldn't find. Sorry for newb question.
Yes, just ordered one from Amazon a few weeks back. Mine came with 3.01.

SamuriHL
Posts: 399
Joined: Mon Jun 14, 2010 5:32 pm

Re: Asus BW-16D1HT Firmware

Post by SamuriHL » Sun Jan 07, 2018 7:02 pm

ron spencer wrote:
SamuriHL wrote:
ron spencer wrote:I have just bought this drive...it is a January 2017 manufactuer date with firmware 3.0. If 3.01 is a faster rip and has no issues otherwise, where can I get 3.01 and how to flash? Or should I just leave well enough alone?

thx!
https://www.makemkv.com/forum2/viewtopi ... 110#p59110
Sorry to ask...is this official firmware? I looked as Asus site and couldn't find. Sorry for newb question.
It was dumped from a drive that had 3.01 on it.

ron spencer
Posts: 10
Joined: Sun Feb 21, 2010 7:28 pm

Re: Asus BW-16D1HT Firmware

Post by ron spencer » Sun Jan 07, 2018 7:28 pm

Ok, so when I go to flash the drive with the zip file via the link a few posts up, it says current version 3.00-06 and new version 1.00-A4 Is this what I want? I thought it was 3.01. Is this just the flash program saying 1.00-A4? Will the Asus drive say 3.01 after the flash or 1.00-A4

thx!

SamuriHL
Posts: 399
Joined: Mon Jun 14, 2010 5:32 pm

Re: Asus BW-16D1HT Firmware

Post by SamuriHL » Sun Jan 07, 2018 7:50 pm

That doesn't seem right, no.

ron spencer
Posts: 10
Joined: Sun Feb 21, 2010 7:28 pm

Re: Asus BW-16D1HT Firmware

Post by ron spencer » Sun Jan 07, 2018 8:19 pm

SamuriHL wrote:That doesn't seem right, no.

Well...I'll leave well enough alone then, unless I can hear from someone who has done the flash. 3.01 only increases rip speed I think. Is there no official 3.01 from Asus?

SamuriHL
Posts: 399
Joined: Mon Jun 14, 2010 5:32 pm

Re: Asus BW-16D1HT Firmware

Post by SamuriHL » Sun Jan 07, 2018 8:22 pm

ron spencer wrote:
SamuriHL wrote:That doesn't seem right, no.

Well...I'll leave well enough alone then, unless I can hear from someone who has done the flash. 3.01 only increases rip speed I think. Is there no official 3.01 from Asus?
I have done the flash from 3.00 to 3.01 and it worked fine. No, there's no "official" anything from ASUS which is why someone dumped the firmware and teddy put the flash package together for us. To me it sounds like you didn't actually load the 3.01 firmware file when you opened the flasher which is bad. You have to select it using the patched flasher.

barrett70
Posts: 24
Joined: Sun Dec 31, 2017 9:02 pm

Re: Asus BW-16D1HT Firmware

Post by barrett70 » Tue Jan 09, 2018 9:52 pm

@TeddyRaspin
Hi, I have a problem I can not decrypt any UHD here:

HL-DT-ST BD-REBH16NS55 1.02 N000200SIK9RFAN8331
Drive (Hardware) Region: 0 (not set!)
Current profile: BD-ROM
Media is a Blu-ray disc.

Total size: 29233824 sectors (57097 MBytes)
Video Blu-ray label: THE_REVENANT
Media is AACS protected!
Drive supports bus encryption!
Disc wants bus encryption!
Drive's signature of the Dv value seems incorrect (bus encryption)!
ERROR processing Blu-ray disc!

I do not know what that means before flashing my player it works.
a solution to solve the problem?
Thanks.

ghost rider
Posts: 46
Joined: Fri Jan 05, 2018 11:30 pm

Re: Asus BW-16D1HT Firmware

Post by ghost rider » Thu Jan 11, 2018 12:02 am

Got my BW-16D1HT today and as figured it came with 3.01 firmware. Working great ripping the Martian in 40 minutes.

Post Reply