Just Errors with New 1.12

Please post here for issues related to UHD discs
TeddyRaspin
Posts: 200
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

Successfully backupped The Martian EXT. UHD with ASUS BW-16D1HT 3.00 firmware (maximum ripping speed 7.5x) and no errors at all. :wink:
Dabruce
Posts: 24
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

Me too, at about 18x , Anydvd :?
TeddyRaspin
Posts: 200
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

18x is impossible for any UHD device. :lol:
Dabruce
Posts: 24
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

LOL OK 18mb/sec...

But i think this fw dont work with my drive, like the other one...
The drive has to have some Hardware issues, i think
Dabruce
Posts: 24
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

OK, next try, Boston (Euro Version), makemkv
Starts with 15 M/sec :shock:


EDIT: After ONLY 44 mins Boston was ripped succesfully :) :lol:

Now, hmm, lets try Deadpool

EDIT2: DEADPOOL was ripped succesfully too, but at poor speed, about 3X :(

Now KingKong ;)

EDIT3: GREAT , 3 in a row, lets see what tomorrow brings...
ekpen49
Posts: 18
Joined: Sat Nov 18, 2017 7:47 pm

Re: Just Errors with New 1.12

Post by ekpen49 »

TeddyRaspin wrote:I can try to fix your BH16NS55 if you wish.

Try to follow my guide to create a valid firmware dump of the faulty BH16NS55. :wink:
Greetings:

I have this same LGBHNS55 ver 1.01.
I use this drive to create over 80+ dumps , then suddenly it just stopped detecting discs. It powers on, thats all.
How do I create a firmware dump for this drive ? Where is your guide ?
If you are in the U.S, can I send it to you ? I will pay to have you ship back to me.
You can PM if possible.

Thanks.

George.
TeddyRaspin
Posts: 200
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

@ekpen49

My guide is here : http://www.makemkv.com/forum2/viewtopic ... 16&t=17058

You can do it from windows command prompt.

Download the devilclaw's flasher from here : https://github.com/devilsclaw/flasher/releases

(32 bit or 64 bit depending on your OS).

Then follow my guide. It is clear and easy. :wink:
Dabruce
Posts: 24
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

ekpen49 wrote:Greetings:

I have this same LGBHNS55 ver 1.01.
I use this drive to create over 80+ dumps , then suddenly it just stopped detecting discs. It powers on, thats all.
Same with my old one. CDs were still detected, but no Blurays... Got a new one by LG, it was broken...
TeddyRaspin
Posts: 200
Joined: Thu Dec 28, 2017 1:41 pm

Re: Just Errors with New 1.12

Post by TeddyRaspin »

Did you try a dump of that unit ? Maybe I could have fixed it. :)
Dabruce
Posts: 24
Joined: Thu Feb 08, 2018 8:57 pm

Re: Just Errors with New 1.12

Post by Dabruce »

No this was the one i send back to LG to get the new one.
Post Reply