Dolby Vision now possible through MP4 Mux.

Please post here for issues related to UHD discs
DaMacFunkin
Posts: 100
Joined: Tue Oct 30, 2018 4:17 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by DaMacFunkin » Thu Mar 26, 2020 7:21 pm

yusesope wrote:
Tue Mar 24, 2020 12:17 pm
DaMacFunkin wrote:
Sun Mar 22, 2020 9:17 pm
Hi, Following the guide can't get FEL to work on the oppp, the file does work in HDR10 on the 2017 shield, can't check on the 2019 shield as it is at my weekend address (won't be there again till Friday)…
Thanks for trying.
If you have time, could you please try what follows with a MEL movie?
yusesope wrote:
Sun Mar 22, 2020 10:45 am
Since you own an OPPO 203, could you do me this favour: while playing a movie (my tool + tsMuxer, please try both a FEL and an MEL movie), can you press the "info" button and take a screenshot (both for the Multimedia information section and for the HDMI output information section)?
It is important, however, that in the player settings, Color Space and Color depth (Video Output Setup) are set to AUTO.
Help yourself with this video (19:24):
https://youtu.be/Pqg8Ky6T7vc?t=1164

Thank you
Hi Yusesope, here are the shots from the Oppo, 1917 that won’t play and reports as 8bit output, which makes sense and Missin Impissibke Fallout which plays fine, both are supposed to be FEL.
Attachments
8B7353D8-56C0-41F3-BCE5-8CD9B9558DC8.jpeg
8B7353D8-56C0-41F3-BCE5-8CD9B9558DC8.jpeg (2.18 MiB) Viewed 1501 times
9988A35F-E0F9-4BEB-9C9C-07186DA60820.jpeg
9988A35F-E0F9-4BEB-9C9C-07186DA60820.jpeg (2.5 MiB) Viewed 1501 times
6E2A607E-8391-4B9E-98C3-78E146C91FB9.jpeg
6E2A607E-8391-4B9E-98C3-78E146C91FB9.jpeg (2.18 MiB) Viewed 1501 times

DaMacFunkin
Posts: 100
Joined: Tue Oct 30, 2018 4:17 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by DaMacFunkin » Thu Mar 26, 2020 7:22 pm

DaMacFunkin wrote:
Thu Mar 26, 2020 7:21 pm
yusesope wrote:
Tue Mar 24, 2020 12:17 pm
DaMacFunkin wrote:
Sun Mar 22, 2020 9:17 pm
Hi, Following the guide can't get FEL to work on the oppp, the file does work in HDR10 on the 2017 shield, can't check on the 2019 shield as it is at my weekend address (won't be there again till Friday)…
Thanks for trying.
If you have time, could you please try what follows with a MEL movie?
yusesope wrote:
Sun Mar 22, 2020 10:45 am
Since you own an OPPO 203, could you do me this favour: while playing a movie (my tool + tsMuxer, please try both a FEL and an MEL movie), can you press the "info" button and take a screenshot (both for the Multimedia information section and for the HDMI output information section)?
It is important, however, that in the player settings, Color Space and Color depth (Video Output Setup) are set to AUTO.
Help yourself with this video (19:24):
https://youtu.be/Pqg8Ky6T7vc?t=1164

Thank you
Hi Yusesope, here are the shots from the Oppo, 1917 that won’t play and reports as 8bit output, which makes sense and Missin Impissibke Fallout which plays fine, both are supposed to be FEL.
Here are the Mission Impossible Fallout pics
Attachments
699D3365-24A1-42DF-8FD6-28F06588EBE0.jpeg
699D3365-24A1-42DF-8FD6-28F06588EBE0.jpeg (2.96 MiB) Viewed 1501 times
D493221A-41F0-4E2E-A9B7-5DC2AB70FF14.jpeg
D493221A-41F0-4E2E-A9B7-5DC2AB70FF14.jpeg (2.48 MiB) Viewed 1501 times
8CC14F00-3083-4BF4-BD63-59822F2F0D01.jpeg
8CC14F00-3083-4BF4-BD63-59822F2F0D01.jpeg (2.94 MiB) Viewed 1501 times

tr000
Posts: 61
Joined: Thu Jul 18, 2019 11:03 am

Re: Dolby Vision now possible through MP4 Mux.

Post by tr000 » Sat Mar 28, 2020 1:16 am

1917 worked great after ripping the BL, EL with TSMuxer, and using Profile 5 with MP4Muxer. It was, hands down, the best visual experience I've had in terms of Dolby Vision. Everyone that has DV needs to see it.

DaMacFunkin
Posts: 100
Joined: Tue Oct 30, 2018 4:17 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by DaMacFunkin » Sat Mar 28, 2020 7:10 am

tr000 wrote:
Sat Mar 28, 2020 1:16 am
1917 worked great after ripping the BL, EL with TSMuxer, and using Profile 5 with MP4Muxer. It was, hands down, the best visual experience I've had in terms of Dolby Vision. Everyone that has DV needs to see it.
I agree, I calibrated my LG c9 last weekend and I wasn’t too sure about the Dolby Vision profile that Calman autocal created, till I watched 1917... brilliantly graded.

DaMacFunkin
Posts: 100
Joined: Tue Oct 30, 2018 4:17 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by DaMacFunkin » Sat Mar 28, 2020 7:35 am

DaMacFunkin wrote:
Thu Mar 26, 2020 7:21 pm
yusesope wrote:
Tue Mar 24, 2020 12:17 pm
DaMacFunkin wrote:
Sun Mar 22, 2020 9:17 pm
Hi, Following the guide can't get FEL to work on the oppp, the file does work in HDR10 on the 2017 shield, can't check on the 2019 shield as it is at my weekend address (won't be there again till Friday)…
Thanks for trying.
If you have time, could you please try what follows with a MEL movie?
yusesope wrote:
Sun Mar 22, 2020 10:45 am
Since you own an OPPO 203, could you do me this favour: while playing a movie (my tool + tsMuxer, please try both a FEL and an MEL movie), can you press the "info" button and take a screenshot (both for the Multimedia information section and for the HDMI output information section)?
It is important, however, that in the player settings, Color Space and Color depth (Video Output Setup) are set to AUTO.
Help yourself with this video (19:24):
https://youtu.be/Pqg8Ky6T7vc?t=1164

Thank you
Hi Yusesope, here are the shots from the Oppo, 1917 that won’t play and reports as 8bit output, which makes sense and Missin Impissibke Fallout which plays fine, both are supposed to be FEL.
Hi, can confirm this mux of 1917 that didn’t work on the Oppo works in Dolby Vision and Atmos on 2019 shield pro, shame I will have to have 2 muxes of some FEL movies till it’s sorted, particularly because the Oppo is a better picture, the Colours are more balanced.

Is there any other way to try and mux so we get a file that works on both?

Regards.

NiCE77
Posts: 1
Joined: Sat Mar 28, 2020 7:49 am

Re: Dolby Vision now possible through MP4 Mux.

Post by NiCE77 » Sat Mar 28, 2020 7:53 am

Hi! Can anyone explain the correct steps for the Nvidia Shield 2019?
Many thanks!

tr000
Posts: 61
Joined: Thu Jul 18, 2019 11:03 am

Re: Dolby Vision now possible through MP4 Mux.

Post by tr000 » Sat Mar 28, 2020 12:08 pm

DaMacFunkin wrote:
Sat Mar 28, 2020 7:10 am
tr000 wrote:
Sat Mar 28, 2020 1:16 am
1917 worked great after ripping the BL, EL with TSMuxer, and using Profile 5 with MP4Muxer. It was, hands down, the best visual experience I've had in terms of Dolby Vision. Everyone that has DV needs to see it.
I agree, I calibrated my LG c9 last weekend and I wasn’t too sure about the Dolby Vision profile that Calman autocal created, till I watched 1917... brilliantly graded.
Yep, that scene with the blue morning sky…beautiful.

jcdr428
Posts: 31
Joined: Fri Mar 20, 2020 6:55 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by jcdr428 » Sat Mar 28, 2020 1:14 pm

shawnc22 wrote:
Thu Mar 26, 2020 7:02 pm
unfortunately I don't understand the subject enough to know what really goes into differentiating between a profile 5 and 8 video. This is definitely not a permanent solution, but maybe @jcdr can consider implementing a user defined dv-profile parameter in a future version of tsmuxer similar to mp4muxer?
I prefer to leave the profile selection as automatic.
I understood that profile 8 is when there is backward compatibility with non-DV players (eg HDR10, SDR...), which is the case with the Blu-ray base layer. However the Blu-ray DVs muxed to single track DV are not fully compliant with profile 8 because of the chroma sample location, which might explain why the player chokes on these. I will push a fix to tsMuxer to change to profile 5.

Edit: Pull request pending merge.
Last edited by jcdr428 on Sat Mar 28, 2020 3:46 pm, edited 1 time in total.

kazuma
Posts: 41
Joined: Fri Nov 08, 2019 9:51 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by kazuma » Sat Mar 28, 2020 2:51 pm

tr000 wrote:
Sat Mar 28, 2020 1:16 am
1917 worked great after ripping the BL, EL with TSMuxer, and using Profile 5 with MP4Muxer. It was, hands down, the best visual experience I've had in terms of Dolby Vision. Everyone that has DV needs to see it.
DaMacFunkin wrote:
Sat Mar 28, 2020 7:10 am
tr000 wrote:
Sat Mar 28, 2020 1:16 am
1917 worked great after ripping the BL, EL with TSMuxer, and using Profile 5 with MP4Muxer. It was, hands down, the best visual experience I've had in terms of Dolby Vision. Everyone that has DV needs to see it.
I agree, I calibrated my LG c9 last weekend and I wasn’t too sure about the Dolby Vision profile that Calman autocal created, till I watched 1917... brilliantly graded.


what are the steps to play this on my lg C9?

shawnc22
Posts: 228
Joined: Tue Jan 21, 2020 7:40 am

Re: Dolby Vision now possible through MP4 Mux.

Post by shawnc22 » Sat Mar 28, 2020 3:29 pm

Much appreciated for the hard work @jcdr428!

@DaMacFunkin, if you have the Oppo, can’t you just play things straight from a decrypted folder backup/iso? That’ll give you DV and Atmos without having to bother with any remuxing, no?

Angryunibrow
Posts: 101
Joined: Wed Nov 06, 2019 11:26 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by Angryunibrow » Sat Mar 28, 2020 4:39 pm

jcdr428 wrote:
Sat Mar 28, 2020 1:14 pm
shawnc22 wrote:
Thu Mar 26, 2020 7:02 pm
unfortunately I don't understand the subject enough to know what really goes into differentiating between a profile 5 and 8 video. This is definitely not a permanent solution, but maybe @jcdr can consider implementing a user defined dv-profile parameter in a future version of tsmuxer similar to mp4muxer?
I prefer to leave the profile selection as automatic.
I understood that profile 8 is when there is backward compatibility with non-DV players (eg HDR10, SDR...), which is the case with the Blu-ray base layer. However the Blu-ray DVs muxed to single track DV are not fully compliant with profile 8 because of the chroma sample location, which might explain why the player chokes on these. I will push a fix to tsMuxer to change to profile 5.

Edit: Pull request pending merge.
Would someone be so kind to link the complete file so I can do some testing

Thanks

DaMacFunkin
Posts: 100
Joined: Tue Oct 30, 2018 4:17 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by DaMacFunkin » Sat Mar 28, 2020 5:12 pm

shawnc22 wrote:
Sat Mar 28, 2020 3:29 pm
Much appreciated for the hard work @jcdr428!

@DaMacFunkin, if you have the Oppo, can’t you just play things straight from a decrypted folder backup/iso? That’ll give you DV and Atmos without having to bother with any remuxing, no?
Yes, that works fine, but not on Shield, I’m after a solution that works on both so I don’t need 2 rips of the same disk.

shawnc22
Posts: 228
Joined: Tue Jan 21, 2020 7:40 am

Re: Dolby Vision now possible through MP4 Mux.

Post by shawnc22 » Sat Mar 28, 2020 5:29 pm

DaMacFunkin wrote:
Sat Mar 28, 2020 5:12 pm
shawnc22 wrote:
Sat Mar 28, 2020 3:29 pm
Much appreciated for the hard work @jcdr428!

@DaMacFunkin, if you have the Oppo, can’t you just play things straight from a decrypted folder backup/iso? That’ll give you DV and Atmos without having to bother with any remuxing, no?
Yes, that works fine, but not on Shield, I’m after a solution that works on both so I don’t need 2 rips of the same disk.
Ah got it. Just out of curiosity for the titles that's worked with both methods, have you noticed any difference in DV picture quality when playing the folder backup vs the ts remux(on shield & oppo)?

yusesope
Posts: 118
Joined: Sun Jul 28, 2019 3:34 am

Re: Dolby Vision now possible through MP4 Mux.

Post by yusesope » Sat Mar 28, 2020 6:16 pm

DaMacFunkin wrote:
Sat Mar 28, 2020 7:35 am
Hi, can confirm this mux of 1917 that didn’t work on the Oppo works in Dolby Vision and Atmos on 2019 shield pro, shame I will have to have 2 muxes of some FEL movies till it’s sorted, particularly because the Oppo is a better picture, the Colours are more balanced.

Is there any other way to try and mux so we get a file that works on both?

Regards.
I'm sorry but at the moment I don't have any other ideas.
The strange thing is that the video bit rate of 1917 is 0kbps.
If the cobination of my tool + tsMuxeR worked for Mission Impossible, it may also work for other FEL titles.
You should make some attempts.


I thank those who have tried the files that I modified (by patching the output of FFmpeg ) but at the moment the whole process consumes too much time (so it is useless).

Angryunibrow
Posts: 101
Joined: Wed Nov 06, 2019 11:26 pm

Re: Dolby Vision now possible through MP4 Mux.

Post by Angryunibrow » Sat Mar 28, 2020 8:32 pm

Could someone post the new tsmuxer modified for profile 5, I have no idea how to use github and download anything

Post Reply