Forum for discussions about UHD-capable dives
-
TeddyRaspin
- Posts: 148
- Joined: Thu Dec 28, 2017 1:41 pm
Post
by TeddyRaspin » Thu Dec 28, 2017 1:56 pm
Hi.
Please someone with Asus firmware 3.01 could share a dump of the firmware ?
These are the steps.
You need Devilscraw flasher, which can be found here :
https://github.com/devilsclaw/flasher/releases
Then, open an elevated command prompt and type :
flasher -D (to display drive and drive ID)
and then
flasher -d [drive id] -l firmware.bin 6 00000000 00200000
and it should dump the current (3.0.1) firmware of your device.
Thanks in advance.

-
Pheran
- Posts: 10
- Joined: Thu Dec 21, 2017 3:45 am
Post
by Pheran » Sat Dec 30, 2017 7:06 pm
TeddyRaspin wrote:Hi.
Please someone with Asus firmware 3.01 could share a dump of the firmware ?
Here you go, hope it's helpful.
-
Attachments
-
- firmware.7z
- 3.01 firmware compressed with 7zip
- (1.14 MiB) Downloaded 1373 times
-
TeddyRaspin
- Posts: 148
- Joined: Thu Dec 28, 2017 1:41 pm
Post
by TeddyRaspin » Sat Dec 30, 2017 10:03 pm
@Pheran
I will never thank you enough.
Thanks mate, it's the best gift after Christmas.
It increased the ripping speed (max 35 MB/s instead of 22.5) of UHD bluray discs !!!
-
mmmkv
- Posts: 24
- Joined: Sun Dec 31, 2017 5:55 pm
Post
by mmmkv » Sun Dec 31, 2017 6:09 pm
Does anyone know whether the
BW-16D1HT-PRO (alternatively listed as
BW-16D1HT PRO) model is equivalent in its UHD reading ability and firmware?
It appears to be a model made for the Australasia regions but can't find any info regarding the UHD aspect since all references in the UHD-related threads refer to the non-Pro model available elsewhere. Only reference I could vaguely source was
one user who believes it's a re-badged
LG BH16NS40.
-
barrett70
- Posts: 24
- Joined: Sun Dec 31, 2017 9:02 pm
Post
by barrett70 » Sun Dec 31, 2017 9:16 pm
@TeddyRaspin
what software did you use to flash your player?
-
TeddyRaspin
- Posts: 148
- Joined: Thu Dec 28, 2017 1:41 pm
Post
by TeddyRaspin » Mon Jan 01, 2018 12:25 am
barrett70 wrote:@TeddyRaspin
what software did you use to flash your player?
DOSFlash
-
barrett70
- Posts: 24
- Joined: Sun Dec 31, 2017 9:02 pm
Post
by barrett70 » Mon Jan 01, 2018 6:57 am
@TeddyRaspin
thank you for your answer, I never used this software how do you use it?
-
TeddyRaspin
- Posts: 148
- Joined: Thu Dec 28, 2017 1:41 pm
Post
by TeddyRaspin » Mon Jan 01, 2018 8:45 am
I'm using a version modified by myself under pure dos and a USB stick,
but you can flash this firmware also under Windows using a LG unlocked flasher
and modify the .bin firmware (made with devilscraw flasher) with an hex editor.
Now I'm out for holidays, but I can make you a correct windows flasher together
with the 3.01 bin firmware suitable for any device having the MT1939 (MediaTek)
chipset (like almost LG and Asus recent bluray drives).
-
barrett70
- Posts: 24
- Joined: Sun Dec 31, 2017 9:02 pm
Post
by barrett70 » Mon Jan 01, 2018 8:55 am
@TeddyRaspin
It would be nice of you if you could do it to me.
I do not know how to use this software.
Thanks.
-
KBJghost
- Posts: 16
- Joined: Sun Feb 01, 2015 1:46 am
Post
by KBJghost » Mon Jan 01, 2018 5:43 pm
TeddyRaspin wrote:I'm using a version modified by myself under pure dos and a USB stick,
but you can flash this firmware also under Windows using a LG unlocked flasher
and modify the .bin firmware (made with devilscraw flasher) with an hex editor.
Now I'm out for holidays, but I can make you a correct windows flasher together
with the 3.01 bin firmware suitable for any device having the MT1939 (MediaTek)
chipset (like almost LG and Asus recent bluray drives).
I'd like to get that as well, if possible. Thanks!
-
SamuriHL
- Posts: 1772
- Joined: Mon Jun 14, 2010 5:32 pm
Post
by SamuriHL » Mon Jan 01, 2018 9:11 pm
TeddyRaspin wrote:Here we go.

Nice. Do you happen to have a 3.00 bin file that could be flashed with that modified flasher, as well? Thanks!
-
barrett70
- Posts: 24
- Joined: Sun Dec 31, 2017 9:02 pm
Post
by barrett70 » Mon Jan 01, 2018 9:16 pm
Thanks For this great job!
happy New Year!
-
KBJghost
- Posts: 16
- Joined: Sun Feb 01, 2015 1:46 am
Post
by KBJghost » Mon Jan 01, 2018 9:20 pm
TeddyRaspin wrote:Here we go.

Thanks!