Page 1 of 1
New to this - How do I upgrade this drive?
Posted: Tue Mar 19, 2024 8:29 pm
by EricR
I'd like to upgrade the following drive but have not clue. I'd also like to backup the existing firmware if possible first.
Drive Information
OS device name: \Device\CdRom1
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.02
Firmware date: 2121-07-08 15:56
Bus encryption flags: 17
Highest AACS version: 72
LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.02
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)
Re: New to this - How do I upgrade this drive?
Posted: Tue Mar 19, 2024 10:24 pm
by MartyMcNuts
EricR wrote: ↑Tue Mar 19, 2024 8:29 pm
I'd like to upgrade the following drive but have not clue. I'd also like to backup the existing firmware if possible first.
Drive Information
OS device name: \Device\CdRom1
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.02
Firmware date: 2121-07-08 15:56
Bus encryption flags: 17
Highest AACS version: 72
LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.02
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)
You can't backup the complete existing firmware, only the important bits. Use SDFtool Flasher to READ the firmware (important bits) to a 70kb tar file. Then WRITE firmware BP60NB10-NB12 1.02-MK to the drive and you will then be able to rip UHD discs.
Re: New to this - How do I upgrade this drive?
Posted: Tue Mar 19, 2024 11:50 pm
by EricR
Ok, sounds good. Where can I locate the MK file to download?
This one?
mk-firmware-pack-20200720.zip\mk-firmware-pack-20200720\MK\HL-DT-ST\BP60NB10 - ZIP archive
HL-DT-ST-BD-RE_BP60NB10-1.02-NM00800-212005070935.bin
Re: New to this - How do I upgrade this drive?
Posted: Wed Mar 20, 2024 3:48 am
by MartyMcNuts
EricR wrote: ↑Tue Mar 19, 2024 11:50 pm
Ok, sounds good. Where can I locate the MK file to download?
This one?
mk-firmware-pack-20200720.zip\mk-firmware-pack-20200720\MK\HL-DT-ST\BP60NB10 - ZIP archive
HL-DT-ST-BD-RE_BP60NB10-1.02-NM00800-212005070935.bin
No. Go to the SDFtool flasher thread and download my "All you need firmware pack (martyMcNuts)". It has the BP60NB10-NB12 1.02-MK file in it.
Re: New to this - How do I upgrade this drive?
Posted: Wed Mar 20, 2024 12:19 pm
by EricR
after I put a disc in it shows:
Drive Information
OS device name: E:
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.02
Firmware date: 2121-07-08 15:56
Bus encryption flags: 17
Highest AACS version: 72
LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.02
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Re: New to this - How do I upgrade this drive?
Posted: Thu Mar 21, 2024 2:44 am
by MartyMcNuts
EricR wrote: ↑Wed Mar 20, 2024 12:19 pm
after I put a disc in it shows:
Drive Information
OS device name: E:
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.02
Firmware date: 2121-07-08 15:56
Bus encryption flags: 17
Highest AACS version: 72
LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.02
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes
Yep, all good.