LOTR 4k

Please post here for issues related to Blu-ray discs
Post Reply
telev
Posts: 3
Joined: Thu Jan 04, 2024 5:22 pm

LOTR 4k

Post by telev »

Hello,

i'm noob in 4k rip. I try to rip my first 4k BR.
I'm able to rip the disk 2 of the LOTR felloship of the ring, but the disk 1 report rapidly an error.

Code: Select all

Error 'OS error - STATUS_DEVICE_DATA_ERROR' occurred while reading '\Device\CdRom0' at offset '261488640'
Error 'OS error - STATUS_DEVICE_DATA_ERROR' occurred while reading '\Device\CdRom0' at offset '261488640'
Error 'OS error - STATUS_DEVICE_DATA_ERROR' occurred while reading '\Device\CdRom0' at offset '261488640'
Error 'OS error - STATUS_DEVICE_DATA_ERROR' occurred while reading '\Device\CdRom0' at offset '261488640'
Error 'OS error - STATUS_DEVICE_DATA_ERROR' occurred while reading '\Device\CdRom0' at offset '261488640'
Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00073.m2ts' at offset '261488640'
Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00073.m2ts' at offset '261488640'
Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00073.m2ts' at offset '261488640'
Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00073.m2ts' at offset '261488640'
Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00073.m2ts' at offset '261488640'
Error 'Scsi error - MEDIUM ERROR:L-EC UNCORRECTABLE ERROR' occurred while reading '/BDMV/STREAM/00073.m2ts' at offset '261488640'
Failed to save title 3 to file F:/BDRip/FullDisc/SEG FPL_MainFeature_t03.mkv
Encountered 29 errors of type 'Read Error' - see http://www.makemkv.com/errors/read/
Here my drive. I just flash the firmware.

Code: Select all

Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: ASUS
Product: BC-12D2HT
Revision: 3.11
Serial number: *****************
Firmware date: 2119-02-27 13:19
Bus encryption flags: 1E
Highest AACS version: 81

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 3.11
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Disc Information
Label: LOTR_FELLOWSHIP_OF_THE_RING_P1
Timestamp: 2020-10-29 19:40:43
Protection: AACS2.0/C v76
Data capacity: 75.72 Gb
Disc type: BD-ROM UHD
Number of layers: 3
Bus encryption flags: 80
Is my disk bad ?

Thanks for you advice.
Woodstock
Posts: 9953
Joined: Sun Jul 24, 2011 11:21 pm

Re: LOTR 4k

Post by Woodstock »

Sometimes, USB drives can run out of power during a rip. These are often random failure, occurring at different places on the disk on different runs. Usually CLOSE to the same spot, but rarely IN the same spot.

Sometimes, a drive will try "too hard" to pull valid data from a disk, and time out, whether it's USB or internal powered. This can happen at the SAME PLACE, on multiple rips.

Is the drive powered by USB? If so, is it USB2, or USB3?
MakeMKV Frequently Asked Questions
How to aid in finding the answer to your problem: Activating Debug Logging
telev
Posts: 3
Joined: Thu Jan 04, 2024 5:22 pm

Re: LOTR 4k

Post by telev »

It's an internal drive :wink:
Woodstock
Posts: 9953
Joined: Sun Jul 24, 2011 11:21 pm

Re: LOTR 4k

Post by Woodstock »

Internal drive would tend to indicated that the disk has a bad spot that couldn't be read past, assuming the error's in the same spot each attempt. Carefully cleaning the disk can help a lot of times.
MakeMKV Frequently Asked Questions
How to aid in finding the answer to your problem: Activating Debug Logging
telev
Posts: 3
Joined: Thu Jan 04, 2024 5:22 pm

Re: LOTR 4k

Post by telev »

I already tried to clean the disk. This change the spot of the error.
I have also tried to rip the second film "The two towers", disk 1 is fine, but disk 2 report also this type of error.

I will retry later
shinynewtie
Posts: 1
Joined: Thu Dec 30, 2021 11:25 pm

Re: LOTR 4k

Post by shinynewtie »

Any luck after trying again?
Post Reply