LG UH12NS30 Libre Drive - Can It Work ?

Discussion of LibreDrive mode, compatible drives and firmwares
Post Reply
tha-tv
Posts: 4
Joined: Wed Mar 06, 2019 9:28 am

LG UH12NS30 Libre Drive - Can It Work ?

Post by tha-tv »

Hi All

First time poster here

I have a LG UH12NS30 with a sticker showing ROM Version 1.03 on it

I have not yet put it in my W10 PC

Will it work as a Libre Drive or do I need to flash the ROM

If I do can anyone point me to a good how to?

I do have a copy of MakeMKV and I did by A licence key for it

(good software needs paid help)

I do hope some on can give me a helping hand
markolarko
Posts: 8
Joined: Sat Nov 04, 2017 11:56 am

Re: LG UH12NS30 Libre Drive - Can It Work ?

Post by markolarko »

Hi
I have the same question of the same drive.

When I launch Makemkv and it starts to read the Bluray this is the message..

MakeMKV v1.14.2 win(x64-release) started
Using direct disc access mode
LibreDrive firmware support is not yet available for this drive (id=D1C17F787A5D)


At startup i get this message from MKV..

I have tried searching for the same answer but I have yet to find a clear answer. So if you get a positive reply I will be delighted!
markolarko
Posts: 8
Joined: Sat Nov 04, 2017 11:56 am

Re: LG UH12NS30 Libre Drive - Can It Work ?

Post by markolarko »

Adding to my earlier message. ..

If anybody can help say when or if LibreDrive will / is available I will be eternally grateful.


On loading a dvd I get this message..

Drive Information
OS device name: \Device\CdRom0
Current profile: DVD-ROM
Manufacturer: HL-DT-ST
Product: BDDVDRW UH12NS30
Revision: 1.00
Serial number: K9IE42F3328
Firmware date: 2113-06-13 14:57
Bus encryption flags: 16
Highest AACS version: 65

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1939
Harware support: Yes
Firmware support: No
Firmware type: Original (unpatched)
Firmware version: 1.00
DVD all regions: Possible, not yet enabled
BD raw data read: Possible, not yet enabled
BD raw metadata read: Possible, not yet enabled
Unrestricted read speed: Possible, not yet enabled

Disc Information
Label: DVD_VIDEO
Timestamp: 2005-05-19 19:28:08
Data capacity: 7.95 Gb
Disc type: DVD-ROM
Disc size: 120mm
Maximum read rate: 10.08 Mbps [1x]
Number of layers: 2 (OTP)
markolarko
Posts: 8
Joined: Sat Nov 04, 2017 11:56 am

Re: LG UH12NS30 Libre Drive - Can It Work ?

Post by markolarko »

Dummy - Response.. Enabling email update when reply posted.
spl147
Posts: 295
Joined: Mon Dec 10, 2012 4:59 pm

Re: LG UH12NS30 Libre Drive - Can It Work ?

Post by spl147 »

tha-tv wrote:
Wed Mar 06, 2019 9:38 am
Hi All

First time poster here

I have a LG UH12NS30 with a sticker showing ROM Version 1.03 on it

I have not yet put it in my W10 PC

Will it work as a Libre Drive or do I need to flash the ROM

If I do can anyone point me to a good how to?

I do have a copy of MakeMKV and I did by A licence key for it

(good software needs paid help)

I do hope some on can give me a helping hand
Does it say NS50 on the label?

i believe support started with the newer NS40 drives, so i would say no. your drive will not read UHD Discs.
tha-tv
Posts: 4
Joined: Wed Mar 06, 2019 9:28 am

Re: LG UH12NS30 Libre Drive - Can It Work ?

Post by tha-tv »

I have SVC code NS30 so I guess no go then, No probs I hae ordered a new drive from a seller here
tha-tv
Posts: 4
Joined: Wed Mar 06, 2019 9:28 am

Re: LG UH12NS30 Libre Drive - Can It Work ?

Post by tha-tv »

Hi

Sorry to seem think but I cannot see my drive mentioned in page the link points to
Post Reply